on Chalkboards, Dry Erase Boards, Metal, Glass, Plexiglas, Hardboard

  Supplies:  Wipe down cloth, Squeegee, Glass Cleaner with Ammonia

   Step 1:  Wipe down the surface removing any foreign matter.

   Crease back the release liner's leading edge ~2 inches.

   Match the edges and Press the starting edge.

   Thoroughly spray glass cleaner with ammonia on the surface (the entire surface for shorter boards or work 2 feet (2/3 meter) at a time).

    Remove the release liner over the sprayed area.

   Wet the edge of the squeegee with the glass cleaner with ammonia.

   Working from the center, slowly pull the squeegee over the surface toward the edges.

   Continue until sprayed area is applied.

   Continue working 2 foot (2/3 meter) sections at a time... spray, pull release liner, squeegee from the center toward the edge.

   Working from the center, slowly squeegee the remaining sprayed area.

   If you need to rework an area, simply peel back...

   and re-apply.

Finish by wiping down and trimming any overlap edges. 

It's that simple...  

   Congratulations... on your New Premium Dry Erase Surface... 

Dry Erase-Plus!

  See more about custom grids, logs, graphics, colors, and images... that are all dry erasable!   Check out  Dry Erase-Plus Infused Graphics...

                                                         Dry Erase-Plus ^TM  logo. 

We help you keep your presentations sharp!

Dry Erase-Plus^™ offers all the benefits:

•   Lengths up to 100 feet

•   Clean Erase anti-ghost

•   Easy-Read anti-glare

•   Project and Write

•   Scratch resistant           

•   Dent resistant

•   Chemical resistant         

•   Graffiti resistant

•   Bacteria resistant          

•   Stain resistant

•   Lifetime Warranty

Check out the features!  Check out the dry erase surface comparison!

 Dry Erase Boards